GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2008 🢒 I-370 🢒 Driveline/Axle 🢒 Front Drive Axle 🢒 Front Drive Axle Clutch Fork Replacement

Removal Procedure

    Object Number: 1347767 Size: SH
  1. Remove the electric motor actuator. Refer to Electric Motor Actuator Replacement .

    2. Object Number: 1339811 Size: SH
  2. Remove the left differential carrier assembly bushing and mounting bracket. Refer to Differential Carrier Assembly Bushing and Bracket Replacement .

    3. Object Number: 1339713 Size: SH
  3. Remove the disconnect housing bolts.

    4. Object Number: 1339720 Size: SH
  4. Remove the disconnect housing.

    5. Object Number: 1347762 Size: SH
  5. Remove the clutch fork, clutch assembly, thrust washer, and gasket from the disconnect housing.

Installation Procedure

    Object Number: 1347762 Size: SH
  1. Install the clutch fork, clutch assembly, thrust washer, and gasket in the disconnect housing.

    2. Object Number: 1339720 Size: SH
  2. Install the disconnect housing.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1339713 Size: SH
  3. Install the disconnect housing bolts.

    4. Tighten
    Tighten the disconnect housing retaining bolts to 60 N·m (44 lb ft).


    Object Number: 1339811 Size: SH
  4. Install the left differential carrier mounting bracket. Refer to Differential Carrier Assembly Bushing and Bracket Replacement .

    5. Object Number: 1347767 Size: SH
  5. Install the electric motor actuator. Refer to Electric Motor Actuator Replacement .