Removal Procedure
- Lower the front portion of the headliner. Refer to
Headlining Trim Panel Replacement .
- Disconnect the electrical connectors from the digital radio antenna assembly.
- Remove the retaining bolt and retainer from the antenna.
- Squeeze the plastic retainer to release the antenna assembly from the roof panel.
- Using an upward motion, remove the antenna assembly from the roof.
Installation Procedure
- Install the antenna assembly to the top of the roof.
- Lower the antenna assembly to the roof panel, ensuring the anti-rotation pin is properly indexed.
Notice: Refer to Fastener Notice in the Preface section.
- Install the retainer and retainer bolt.
Tighten
Tighten the bolt to 6 N·m (53 lb in).
- Connect the antenna electrical connectors.
- Install the headliner. Refer to
Headlining Trim Panel Replacement .