Tools Required

J 45866 Input Shaft Seal Installer

1. Remove the transmission input shaft bearing retainer. Refer to Transmission Input Shaft Bearing Retainer Replacement .



2. Using a hammer and a punch, remove the input shaft seal from the input shaft bearing retainer.

1. Using the J 45866 and a hammer, install the input shaft seal into the input shaft bearing retainer.

•	The spring side of the seal goes toward the tool

•	Ensure the seal is installed square

•	The tool will install the seal to the correct depth

2. Install the transmission input shaft bearing retainer. Refer to Transmission Input Shaft Bearing Retainer Replacement .