GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2008 🢒 I-370 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Pickup Box Endgate Latch Cover Replacement

Removal Procedure

    Object Number: 1245393 Size: SH
  1. Open the endgate.
  2. Remove the screws retaining the endgate cover to the endgate.
  3. Remove the endgate cover from the endgate (1).

Installation Procedure

    Object Number: 1245393 Size: SH
  1. Install the endgate cover to the endgate (1).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the screws retaining the endgate cover to the endgate, starting at the hole marked with the triangle (1).

    3. Tighten
    Tighten the endgate cover screws to 2.5 N·m (22 lb in) starting at the bolt hole marked with the triangle (1).

  3. Close the endgate.