Removal Procedure
- Open the front door.
Remove the bolt retaining the front door check link to the body.
- Remove the front door wiring harness grommet from the body and disconnect the door wiring harness connectors. Refer to
Front Side Door Wiring Harness Replacement.
- Remove the bolts (1) retaining the front door hinge keeper straps.
- With the aid of an assistant, lift the front door up off the body side hinges and place the door on a clean, protected surface.
- Remove the bolts retaining the door side hinges to the door.
- Remove the hinges from the door.
Installation Procedure
- Position the door side front door hinge to the door.
Notice: Refer to Fastener Notice in the Preface section.
- Install the bolts retaining the door side door hinge to the door.
Tighten
Tighten the door side front door hinge bolts to 27 N·m (20 lb ft).
- With the aid of an assistant, lower the front door down onto the body side hinge straps.
- Install the bolts (1) retaining the front door hinge keeper straps.
Tighten
Tighten the hinge keeper strap bolts to 25 N·m (18 lb ft).
- Connect the front door wiring harness connectors and install the front door wiring harness grommet to the body. Refer to
Front Side Door Wiring Harness Replacement.
- Install the bolt retaining the front door check link to the body.
Tighten
Tighten the front door check link bolt to 25 N·m (18 lb ft).
- Inspect the door for proper operation and alignment. Refer to
Front Side Door Adjustment.