GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2009 🢒 I-370 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Evaporative Emission Canister Vent Solenoid Valve Replacement

Removal Procedure

    Object Number: 1560102 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the evaporative emission (EVAP) canister vent solenoid valve electrical connector (1).

    3. Object Number: 1560077 Size: SH
  3. Disconnect the fuel fill pipe vapor line quick connect (1) from the EVAP canister. Refer to Plastic Collar Quick Connect Fitting Service .

    4. Object Number: 1564240 Size: SH
  4. Disconnect the EVAP canister vent solenoid valve quick connect from the EVAP canister. Refer to Plastic Collar Quick Connect Fitting Service .
  5. Disengage the bracket retaining tab and remove the EVAP canister vent solenoid valve (1).

Installation Procedure

    Object Number: 1564240 Size: SH
  1. Engage the bracket retaining tab and install the EVAP canister vent solenoid valve (1).
  2. Connect the EVAP canister vent solenoid valve quick connect to the EVAP canister. Refer to Plastic Collar Quick Connect Fitting Service .

    3. Object Number: 1560077 Size: SH
  3. Connect the fuel fill pipe vapor line quick connect (1) to the EVAP canister. Refer to Plastic Collar Quick Connect Fitting Service .

    4. Object Number: 1560102 Size: SH
  4. Connect the EVAP canister vent solenoid valve electrical connector (1).
  5. Lower the vehicle.