For 1990-2009 cars only
Removal Procedure
- Release the park brake.
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
- Remove the wheel house inner liner. Refer to Front Wheelhouse Liner Replacement.
- Remove the park brake cable adjusting nut.
- Remove the front park brake cable from the equalizer.
- Remove the retaining bolt for the front park brake cable.
- Remove the knee bolster panel. Refer to Knee Bolster Replacement.
- Remove the clutch pedal assembly. Refer to Clutch Pedal Replacement.
- Remove the electrical connector from the brake switch.
- Remove the park brake cable pedal mounting bolts.
- Remove the front park brake cable weather seal.
- Remove the park brake pedal assembly from the vehicle.
- Remove the front park brake pedal and cable assembly from the vehicle noting routing for installation.
Installation Procedure
- Install the park brake pedal and cable assembly as previously routed.
- Install the mounting bolts for the park brake pedal assembly and tighten to 20 N·m (15 lb ft).
- Install the front park brake cable weather seal.
- Install the clutch pedal assembly. Refer to Clutch Pedal Replacement.
- Install the retaining bolt for the front park brake cable at the wheel well and tighten the bolt to 20 N·m (15 lb ft).
- Install the front park brake cable to the equalizer.
- Install the park brake cable adjusting nut. Refer to Park Brake Adjustment.
- Install the wheel house liner. Refer to Front Wheelhouse Liner Replacement.
- Install the knee bolster panel. Refer to Knee Bolster Replacement.
- Lower the vehicle.
Caution: Refer to Fastener Caution in the Preface section.
