GM Service Manual Online
For 1990-2009 cars only

Object Number: 2083264  Size: MF

Callout

Component Name

Preliminary Procedure

Remove the steering column. Refer to Steering Column Replacement.

1

Steering Wheel Position Sensor Retaining Clip

2

Steering Wheel Position Sensor

Tip

    • When reusing a steering wheel position sensor, you must install a pin into the sensor before removal or the sensor will lose its centered position and must be discarded. The pin diameter must be in the range of 1-2 mm.
    • A new steering wheel position sensor will come with a pin installed in the sensor. The steering wheel position sensor will already come centered, DO NOT remove the pin until the steering wheel position sensor is properly seated.

3

Steering Shaft Lower Bearing