GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Isuzu
🢒
2009
🢒
I-370
🢒
Seats
🢒
Seat Hardware, Trim, and Upholstery
🢒 Jack and Tool Stowage Container Bracket Replacement
Removal Procedure
Remove the jack stowage cover. Refer to
Jack Stowage Cover Replacement
.
Remove the jack from the stowage bracket by turning the jack handle to loosen the jack.
Remove the 2 bolts securing the jack stowage bracket to the vehicle.
Installation Procedure
Position the jack stowage bracket on the floor stud in the vehicle.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the 2 bolts securing the jack stowage bracket to the vehicle. Tighten the jack stowage bracket bolts to
9 N·m (79 lb in).
Install the jack in the stowage bracket by positioning the jack on the 2 studs then turning the jack handle to tighten the jack in the bracket.
Install the jack stowage cover. Refer to
Jack Stowage Cover Replacement
.