GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Isuzu H-Series 🢒 Transmission/Transaxle 🢒 Manual Transmission - ZF S6-650 🢒 Control Lever and/or Boot Replacement

Removal Procedure

    Object Number: 816150 Size: SH
  1. Loosen the control lever boot.
  2. Remove the control lever boot and clamp.

    3. Important: Loosen DO NOT remove the shift lever assembly adjustment nut if replacing the control lever.


    Object Number: 1199071 Size: SH
  3. Remove the control lever set screw.
  4. Remove the control lever.

Installation Procedure

    Object Number: 1199071 Size: SH
  1. Install the control lever and boot on the shift lever, if removed.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the control lever set screw in the shift lever.

    3. Tighten
    Tighten the control lever set screw to 39 N·m (29 lb ft).


    Object Number: 816150 Size: SH
  3. Install the control lever boot and clamp to the floor.