GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2008 🢒 Isuzu H-Series 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Mass Airflow Sensor with Intake Air Temperature Sensor Replacement

Removal Procedure

    Object Number: 1911114 Size: SH
  1. Disconnect the electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.
  2. Remove the MAF/IAT sensor screws (1).
  3. Remove the MAF/IAT sensor (2) from the air cleaner outlet duct.

Installation Procedure

    Object Number: 1911114 Size: SH
  1. Install the MAF/IAT sensor (2) to the air cleaner outlet duct.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the MAF/IAT sensor screws (1).

    3. Tighten
    Tighten the screws to 8 N·m (70 lb in).

  3. Connect the electrical connector to the MAF/IAT sensor.