Engine Controls Schematic Icons. Isuzu Isuzu MD F-Series 2005

For 1990-2009 cars only

Makes 🢒 Isuzu 🢒 2005 🢒 Isuzu MD F-Series 🢒 Engine 🢒 Engine Controls - 7.8L 🢒 Engine Controls Schematic Icons

Icon

Icon Definition

Caution: DC and AC high-voltage is present. To reduce the risk of severe shocks and burns, the high-voltage system should be disabled any time service work is being performed on or around the high-voltage system. When in doubt, always disable the high-voltage system. The 12-volt system will still be active after the high-voltage system has been disabled.

Important: Twisted-pair wires provide an effective "shield" that helps protect sensitive electronic components from electrical interference. If the wires were covered with shielding, install new shielding. Refer to Splicing Twisted or Shielded Cable .

In order to prevent electrical interference from degrading the performance of the connected components, you must maintain the proper specification when making any repairs to the twisted-pair wires shown:

•	The wires must be twisted a minimum of 12 turns per 31 cm (12 in) as measured anywhere along the length of the wires

•	The outside diameter of the twisted wires must not exceed 6.0 mm (0.25 in)