GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Tilt the cab. Refer to Cab Tilting .

  2. Object Number: 215664  Size: SH
  3. Remove the upper inner fender panel bolts.
  4. Remove the upper inner fender panel.

Installation Procedure


    Object Number: 215664  Size: SH
  1. Install the upper inner fender to the cab.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install upper inner fender bolts.
  4. Tighten
    Tighten the bolts to 9 N·m (80 lb in).

  5. Lower the cab. Refer to Cab Tilting .