GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Isuzu MD F-Series 🢒 Body 🢒 Body Front End 🢒 Wheelhouse Panel Replacement - Lower

Removal Procedure
  1. Tilt and secure the cab. Refer to Cab Tilting .
  2. Remove the inner extension panel bolts.
  3. Remove the inner extension panel.

    4. Object Number: 215659 Size: SH
  4. Remove the inner fender panel bolts.
  5. Remove the inner fender panel.

Installation Procedure

    Object Number: 215659 Size: SH
  1. Install the inner fender panel to the cab.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the inner fender panel bolts.

    3. Tighten
    Tighten the bolts to 9 N·m (80 lb in).

  3. Install the inner extension panel.
  4. Install the inner extension panel bolts.

    5. Tighten
    Tighten the bolts to 9 N·m (80 lb in).

  5. Lower the cab. Refer to Cab Tilting .