Emblem/Nameplate Replacement Old

Apply name plates in an environment free of dust or dirt that could come in contact with the adhesive backing and prevent proper adhesion.

1. Clean the area where the replacement item is to be mounted.

•	Use a suitable solvent such as flash naphtha or a mixture of 50 percent isopropyl /alcohol and 50 percent water.

•	Dry the area thoroughly.

2. The body area and the name plate must be at a temperature range of 26-40°C (80-105°F). If necessary, carefully heat the body area and apply heat to the back of the name plate.
3. Remove the protective liner from the emblem.
4. Line the name plate up with the locating holes in the hood and press into position.