GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Isuzu MD F-Series 🢒 Body 🢒 Instrument Panel, Gages, and Console 🢒 Instrument Panel Carrier Replacement

Removal Procedure
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

    2. Object Number: 214649 Size: SH
  2. Remove the instrument panel cluster (IPC) trim.

    3. Object Number: 215553 Size: SH
  3. Remove the IPC. Refer to Instrument Cluster Replacement .
  4. Disconnect the IPC electrical connector.

    5. Object Number: 215557 Size: SH
  5. Remove the speedometer. Refer to Speedometer Replacement .
  6. Disconnect the speedometer electrical connector.
  7. Remove the trim surrounding the radio. Refer to Radio Replacement .

    8. Object Number: 214665 Size: SH
  8. Remove the right and left lower assist handles and the lower assist handle trim.

    9. Object Number: 214669 Size: SH
  9. Remove the right side lower instrument panel (I/P) trim.
  10. Carefully pry up the defroster grilles and remove them.

    11. Object Number: 214660 Size: SH
  11. Remove the upper I/P retaining bolts.
  12. Remove the I/P upper trim.

    13. Object Number: 214662 Size: SH
  13. Remove the center relay housing.
  14. Remove the hood release cable handle.
  15. Disconnect the I/P wiring harness.
  16. Remove the I/P support.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.

  1. Install the I/P support with the screws.

    2. Tighten
    Tighten the screws to 6 N·m (53 lb in).

  2. Connect the I/P wiring harness.
  3. Install the hood release cable handle.

    4. Object Number: 214662 Size: SH
  4. Install the center relay housing.

    5. Object Number: 214660 Size: SH
  5. Install the I/P upper trim.
  6. Install the upper I/P retaining bolts.
  7. Install the defroster grilles.

    8. Object Number: 214669 Size: SH
  8. Install the right side lower I/P trim.

    9. Object Number: 214665 Size: SH
  9. Install the right and left lower assist handles and the lower assist handle trim with the appropriate bolts.

    10. Tighten
    Tighten the bolts to 6 N·m (53 lb in).

  10. Connect the radio and climate control assembly electrical connector.
  11. Install the trim surrounding the radio.
  12. Connect the speedometer electrical connector. Refer to Speedometer Replacement .

    13. Object Number: 215557 Size: SH
  13. Install the speedometer. Refer to Speedometer Replacement .
  14. Connect the IPC electrical connector.

    15. Object Number: 215553 Size: SH
  15. Install the IPC. Refer to Instrument Cluster Replacement .

    16. Object Number: 214649 Size: SH
  16. Install the IPC trim.
  17. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .