GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Isuzu MD F-Series 🢒 Body 🢒 Lighting Systems 🢒 Parking and Turn Signal Lamp Replacement

Removal Procedure
  1. Turn OFF the headlamp switch.
  2. Disconnect the front directional signal lamp housing electrical connector.

    3. Object Number: 214289 Size: SH
  3. Remove the 2 signal lamp housing nuts.
  4. Remove the backing plate.
  5. Remove the lamp housing.

Installation Procedure
  1. Install the front directional signal lamp housing.
  2. Install the lamp housing backing plate.

    3. Object Number: 214289 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the 2 signal lamp nuts.

    4. Tighten
    Tighten the nuts to 8 N·m (71 lb in).

  4. Connect the lamp housing electrical connector.