Schematic Reference: Exterior Lights Schematics

Connector End View Reference: Lighting Systems Connector End Views

Did you perform the Diagnostic System Check - Vehicle?

--

Go to Step 2

Go to Diagnostic System Check - Vehicle

1. Place the hazard switch in the ON position.
2. Observe the hazard lamps.

Do the hazard lamps illuminate and flash?

--

Go to Testing for Intermittent Conditions and Poor Connections

Go to Step 3

Do the vehicles turn signals operate properly?

Go to Step 4

Go to Symptoms - Lighting Systems

Replace the multifunction switch. Refer to Turn Signal Multifunction Switch Replacement .

Did you complete the replacement?

Go to Step 5

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3