GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Isuzu MD F-Series 🢒 Body 🢒 Lighting Systems 🢒 Clearance Lamp Replacement

Removal Procedure
  1. Turn OFF the headlamp switch.

    2. Object Number: 214274 Size: SH
  2. Remove the clearance lamp lens screws.
  3. Remove the lens.
  4. Pull the clearance lamp bulb straight out of the socket

Installation Procedure

    Object Number: 214274 Size: SH
  1. Press the clearance lamp bulb straight into the socket
  2. Install the clearance lamp lens.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screws to the clearance lamp lens.

    4. Tighten
    Tighten the screws to 1.9 N·m (17 lb in).