GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Isuzu MD F-Series 🢒 Body 🢒 Lighting Systems 🢒 Roof Marker Lamp Replacement

Removal Procedure
  1. Turn OFF the headlamp switch.

    2. Object Number: 214280 Size: SH
  2. Remove the screws from the roof marker lamp lens.
  3. Remove the roof marker lamp lens.
  4. Remove the 4 screws from the lamp housing.
  5. Disconnect the electrical connector from the roof marker lamp.
  6. Remove the lamp housing.

Installation Procedure

    Object Number: 214280 Size: SH
  1. Connect the electrical connector to the roof marker lamp.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the lamp housing. Secure the lamp housing with 4 screws.

    3. Tighten
    Tighten the screws to 1.9 N·m (17 lb in).

  3. Install the roof marker lamp lens.
  4. Install the screws to the roof marker lens.

    5. Tighten
    Tighten the screws to 1.9 N·m (17 lb in).