Schematic Reference: Interior Lights Schematics

Connector End View Reference: Lighting Systems Connector End Views

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle

1. Place the dome lamp switch in the DOOR position.
2. Close the drivers door.

Is the dome lamp OFF?

Go to Testing for Intermittent Conditions and Poor Connections

Go to Step 3

Place the dome lamp switch in the OFF position.

Does the dome lamp illuminate?

Go to Step 6

Go to Step 4

1. Place the dome lamp switch in the DOOR position.
2. Disconnect the door jamb switch.

Does the dome lamp illuminate?

Go to Step 5

Go to Step 7

Repair a short to ground in the dome lamp control circuit. Refer to Circuit Testing and Wiring Repairs .

Did you complete the repair?

Go to Step 8

--

Replace the dome lamp assembly. Refer to Dome Lamp Replacement .

Did you complete the replacement?

Go to Step 8

--

Replace the door jamb switch. Refer to Front Side Door Jamb Switch Replacement .

Did you complete the replacement?

Go to Step 8

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3