GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Isuzu MD F-Series 🢒 Body 🢒 Lighting Systems 🢒 Park/Turn Signal/Side Marker Lamp Bulb Replacement

Removal Procedure
  1. Turn OFF the headlamp switch.

    2. Object Number: 214293 Size: SH
  2. Remove the screw from the side marker lamp lens assembly.
  3. Remove the lens assembly.
  4. Remove the socket from the lens assembly.
  5. Remove the bulb from the side marker lamp as follows:
    6. 5.1. Press the bulb into the socket and turn the bulb counterclockwise.
    5.2. Pull the bulb out.

Installation Procedure

    Object Number: 214293 Size: SH
  1. Install the side marker lamp bulb as follows:
    2. 1.1. Press the bulb into the socket.
    1.2. Turn the bulb clockwise.
  2. Install the socket into the lens assembly.
  3. Install the side marker lamp lens assembly.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the screw into the lens assembly.

    5. Tighten
    Tighten the screw to 1.9 N·m (17 lb in).