GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Isuzu MD F-Series 🢒 Body 🢒 Wipers/Washer Systems 🢒 Windshield Wiper Blade Replacement

Removal Procedure

    Object Number: 348756 Size: SH
  1. Complete the following steps in order to remove the wiper blade from the wiper arm:
    2. 1.1. Insert a narrow-bladed screwdriver into the slot over the retainer spring.
    1.2. Pivot the screwdriver so that the blade tip presses downward on the retainer spring.
    1.3. Release the blade from the pin of the wiper arm.

    Important: If you remove the insert, replace the component.

  2. Squeeze the locking tabs together in order to remove the insert from the blade.

Installation Procedure

    Object Number: 348756 Size: SH
  1. Complete the following steps in order to install the wiper arm:
    2. 1.1. Position the retainer at the bottom end of the blade.
    1.2. Guide the insert through the blade.

    Ensure that you engage the claw sets along the entire length of the blade.

    The insert is fully seated when both locking tabs engage the claw set.

  2. Install the blade to the wiper by snapping the blade into place.