GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Isuzu MD F-Series 🢒 Body 🢒 Wiring Systems 🢒 Turn Signal Multifunction Switch Replacement

Removal Procedure

    Object Number: 228496 Size: MH
  1. Remove the steering wheel (3). Refer to Steering Wheel Replacement .
  2. Push the boot (8) off of the cowl halves (5,12) onto the lower steering shaft cover (9).
  3. Remove the left and right side cowl half screws.
  4. Remove the left (12) and right (5) side cowl halves from the upper steering shaft assembly (7).
  5. Disconnect the electrical connector from the combination switch (4).
  6. Remove the combination switch screws and the combination switch (4) from the upper steering shaft assembly (7).

Installation Procedure

    Object Number: 228496 Size: MH
  1. Install the combination switch (4) to the upper steering shaft assembly (7).
  2. Connect the electrical connector to the combination switch (4).
  3. Install the left (12) and the right (5) side cowl halves to the upper steering shaft assembly (7) with screws.
  4. Position the boot (8) over the lower steering shaft cover (9).
  5. Install the steering wheel (3).