Removal Procedure
- Remove the accessory panel (1) by gently pulling
to release retaining clips.
- Disconnect the electrical connectors (1).
- Disconnect the bulb (2) by turning a quarter turn counter clockwise.
- Remove the cigar lighter housing jamnut (1).
- Remove the housing retainer (2).
- Release the retaining tabs and pull lighter housing toward rear of vehicle.
Installation Procedure
- Install the cigar lighter housing.
- Install the housing retainer.
- Attach the housing jamnut.
- Connect the bulb by turning a quarter turn clockwise.
- Connect the electrical connectors.
- Replace the accessory trim panel.