GM Service Manual Online
For 1990-2009 cars only

Front Disc Brake Pads Replacement Dayton-Walther

Removal Procedure

    Notice: Refer to Brake Caliper Notice in the Preface section.

  1. Remove the brake caliper. Refer to Front Brake Caliper Replacement .
  2. Do not remove the brake line from the caliper.


    Object Number: 22102  Size: SH
  3. Remove the brake pad retainer spring.

  4. Object Number: 200256  Size: SH
  5. Slide the outer brake pad along the rail in the brake caliper housing to the notches.
  6. Remove the outer brake pad.
  7. Slide the inner brake pad along the rail in the brake caliper housing to the notches.
  8. Remove the inner brake pad.

Installation Procedure

  1. Inspect the brake caliper. Refer to Brake Caliper Inspection .

  2. Object Number: 200256  Size: SH
  3. Install the inner brake pad.
  4. Install the outer brake pad.

  5. Object Number: 22102  Size: SH
  6. Install a new brake pad retainer spring.
  7. If the service kit includes extra springs, discard the springs.
  8. Install the brake caliper. Refer to Front Brake Caliper Replacement .