GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Isuzu MD F-Series 🢒 Brakes 🢒 Antilock Brake System 🢒 Rear Wheel Speed Sensor Ring Replacement

Tools Required

    • J 28721-909 Truck Wheel Bearing Locknut Wrench 3 ¾ in.
    • J 28721-910 Truck Wheel Bearing Locknut Wrench.
    • J 28721-911 Truck Wheel Bearing Locknut Wrench
    • J 28721-913 Truck Wheel Bearing Locknut Wrench 3 7/8 in 8 pt.
    • J 45107 Tone Ring Remover/Installer
    • J 36214 Axle Stud Cone Plier

Caution: Refer to Brake Dust Caution in the Preface section.

Removal Procedure
  1. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  2. Remove the brake caliper mounting plate. Refer to Rear Brake Caliper Mount Plate Replacement .
  3. Remove the axle shaft. Refer to Rear Axle Shaft and/or Gasket Replacement .
  4. Remove the spindle high tension wheel nut using one of the following:
    5. • J 28721-909
    • J 28721-910
    • J 28721-911
    • J 28721-913
  5. Remove the hub/rotor assembly. Refer to Rear Brake Rotor Replacement .
  6. Remove the wheel speed sensor ring using the J 45107 .

Installation Procedure

    Object Number: 795298 Size: SH
  1. Install the wheel speed sensor ring using the (1) J 45107 .

    2. Object Number: 795301 Size: SH
  2. Install the hub/rotor assembly. Refer to Rear Brake Rotor Replacement .
  3. Install the spindle high tension wheel nut using on of the following:
    4. • J 28721-909
    • J 28721-910
    • J 28721-911
    • J 28721-913
  4. Install the axle shaft. Refer to Rear Axle Shaft and/or Gasket Replacement .
  5. Install the brake caliper. Refer to Rear Brake Caliper Replacement .
  6. Install the tire/wheel assembly. Refer to Tire and Wheel Removal and Installation .