Condenser Fan Always On. Isuzu Isuzu MD F-Series 2005

For 1990-2009 cars only

Makes 🢒 Isuzu 🢒 2005 🢒 Isuzu MD F-Series 🢒 HVAC 🢒 HVAC Systems - Manual 🢒 Condenser Fan Always On

Step	Action	Yes	No
Schematic Reference: HVAC Schematics DEFINITION: The condenser fan motor runs continuously.
1	Did you review the HVAC operation and perform the necessary inspections?	Go to Step 2	Go To Symptoms - HVAC Systems - Manual
2	Turn ON the ignition, with the engine OFF. Place the blower switch in the OFF position. Place the A/C switch in the OFF position. Is the condenser fan motor running all the time?	Go to Step 3	Go to Testing for Intermittent Conditions and Poor Connections
3	Remove the condenser motor relay. Did the condenser fan motor turn OFF?	Go to Step 5	Go to Step 4
4	Repair the short to B+ in the condenser fan motor supply voltage circuit. Refer to Wiring Repairs . Did you find and complete the repair?	Go to Step 13	--
5	Start the engine. Turn the A/C switch to the OFF position. Does the A/C compressor operate?	Go to HVAC Compressor Clutch Does Not Disengage	Go to Step 6
6	Disconnect the A/C high pressure switch. Did the condenser fan motor turn OFF?	Go to Step 7	Go to Step 8
7	Connect the A/C high pressure switch. Perform the Cooling Insufficient Air Conditioning Inoperative Diagnostic. Refer to Cooling Insufficient - Air Conditioning (A/C) Inoperative . Did you find and correct the condition?	Go to Step 13	Go to Step 9
8	Test the condenser relay control circuit for a short to ground. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition?	Go to Step 13	Go to Step 10
9	Inspect for poor connections at the harness connector of the A/C high pressure switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition?	Go to Step 13	Go to Step 11
10	Inspect for poor connections at the harness connector of the condenser fan relay. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition?	Go to Step 13	Go to Step 12
11	Replace the A/C high pressure switch. Refer to Air Conditioning (A/C) High Pressure Switch Replacement . Did you complete the repair?	Go to Step 13	--
12	Replace the condenser fan relay. Did you complete the repair?	Go to Step 13	--
13	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 2