Exhaust Particulate Filter Rear Cooler Pipe Replacement With LF8

1. Remove the exhaust particulate filter rear cooler pipe bracket nuts (1).
2. Remove the exhaust particulate filter rear cooler pipe bracket (2)
3. Remove the exhaust particulate filter rear cooler pipe (3) from the vehicle.
4. Transfer any parts as needed.

1. Position the exhaust particulate filter rear cooler pipe (3) to the vehicle.
2. Align the exhaust particulate filter rear cooler pipe bracket (2) to the frame.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the exhaust particulate filter rear cooler pipe bracket nuts (1).

Tighten
Tighten the nuts to 45 N·m (33 lb ft).