Exhaust Gas Recirculation Cooler Temperature Sensor Replacement - Position 1 for Isuzu Isuzu MD F-Series 2007

1. Tilt the cab. Refer to Cab Tilting.
2. Disconnect the temperature sensor electrical connector.
3. Remove the temperature sensor from the exhaust gas recirculation (EGR) cooler.

1. Inspect the sensor for damage.
2. Replace the sensor if worn or damaged.

Notice: Refer to Component Fastener Tightening Notice in the Preface section.




1. Install the sensor into the EGR cooler.

Tighten
Tighten the sensor to 44 N·m (33 lb ft).

2. Connect the electrical connector.
3. Lower the cab.