GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2007 🢒 Isuzu MD F-Series 🢒 Body Systems 🢒 Wipers and Washers 🢒 Windshield Wiper Motor Replacement

Removal Procedure
  1. Raise and support the hood.

    2. Object Number: 215289 Size: SH
  2. Align the wiper motor with the alignment marks.

    3. Object Number: 215278 Size: SH
  3. Disconnect the wiper arm links (1) from the left wiper transmission at the wiper motor crank (2).
  4. Remove the electrical connector from the wiper motor.
  5. Loosen the wiper motor mounting nuts enough to access the wiper wiring harness retaining clip on the back side of the wiper motor.
  6. Remove the wiper wiring harness from the wiper motor bracket.

    7. Object Number: 215292 Size: SH
  7. Remove the wiper motor from the vehicle.

Installation Procedure

    Object Number: 215292 Size: SH
  1. Install the wiper motor to the vehicle.
  2. Install the wiper wiring harness clip to the wiper motor bracket.
  3. Install the wiper motor to the vehicle using the mounting nuts.
  4. Install the electrical connector to the wiper motor.

    5. Object Number: 215278 Size: SH
  5. Connect the wiper arm links (1) to the wiper motor crank (2) and to the left wiper transmission.
  6. Close the hood.
  7. Connect the negative battery cable.