Removal Procedure
- Remove the cluster trim. Refer to
Instrument Panel Carrier Replacement
.
- Remove the upper I/P pad.
- Remove the cable from the retaining clips.
- Remove the cable from across the I/P carrier.
- Remove the left side assist handle. Remove the A-pillar trim.
- Remove the 2 screws from the antenna base on the cab.
- Remove the antenna from the cab.
Installation Procedure
- Install the antenna to the cab.
- Install the antenna base screws.
- Install the A-pillar trim. Install the left side assist handle.
- Install the cable to across the I/P carrier.
- Install the retaining clips.
- Install the upper I/P pad.
- Install the cluster trim. Refer to
Instrument Panel Carrier Replacement
.