GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2007 🢒 Isuzu MD F-Series 🢒 Transmission/Transaxle 🢒 Automatic Transmission - Allison 🢒 Shift Cable Replacement

Removal Procedure

    Object Number: 1247636 Size: SH
  1. Remove the fasteners securing the shift control housing to the shift control and position the control housing out of the way.

    2. Object Number: 1247634 Size: SH
  2. Remove the nuts, the washer, and the clip securing the shift cable to the shift control.

    3. Object Number: 1247632 Size: SH
  3. Remove the cotter pin and the clevis pin securing the shift cable to the transmission shift lever.
  4. Note the positions of the clamps securing the shift cable to the frame rail.
  5. Remove the bolts and clamps securing the shift cable to the frame rail and brackets.
  6. Remove the grommets securing the shift cable to the cab and the frame rail.
  7. Remove the shift cables.

Installation Procedure
  1. Position the new shift cable in the original position.

    2. Notice: Ensure the shift control lever and the transmission shift lever are in the mechanical neutral position.

  2. Install the bolts and the clamps in order to secure the shift cable to the frame rail and brackets.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1247634 Size: SH
  3. Install the nuts, the washer, and the clip in order to secure the shift cable to the shift control.

    4. Tighten
    Tighten the nuts to 7 N·m (62 lb in).

  4. Adjust the shift cable. Refer to Shift Cable Adjustment .

    5. Object Number: 1247636 Size: SH
  5. Install the fasteners in order to secure the shift control housing to the shift control.