- Fill the master cylinder. Refer to
Fluid and Lubricant Recommendations.
- Place the correct size box wrench over the bleeder screw and attach a hose over the screw. Allow the end of the hose to drop into a clear container with enough fluid in it to cover the end of the hose.
- With the aid of an assistant, perform the following:
| 3.1. | Slowly depress the clutch pedal one time and hold. |
| 3.2. | Loosen the bleeder screw to purge the air from the actuator. |
| 3.3. | Tighten the bleeder screw and slowly release the pedal. |
| 3.4. | Check the master cylinder level and fill, if required. |
| 3.5. | Repeat this sequence until all the air is purged. |
