GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 1998 🢒 Isuzu MD Steel Tilt (F Model) 🢒 Engine 🢒 Engine Exhaust 🢒 Exhaust Brake Ball Joint Replacement

Exhaust Brake Ball Joint Replacement for Isuzu Isuzu MD Steel Tilt (F Model) 1998

Removal Procedure
  1. Remove the exhaust brake actuator.

    2. Refer to Engine Brake Actuator Control Valve Replacement .

  2. Remove the wire retaining clip from the ball joint.
  3. Detach the ball joint from the assembly.

Installation Procedure
  1. Install a new ball joint cap.
  2. Install a new wire retaining clip.
  3. Install the exhaust brake actuator.

    4. Refer to Engine Brake Actuator Control Valve Replacement .