For 1990-2009 cars only
| • | Sharp edges or faulty objects near the seat belt buckle or the latch plate may cause possible damage. |
| • | Do not bend the seat belt buckle or the latch plate parts. |
| • | Do not bleach or dye the belt webbing. |
| • | Clean the belt webbing with a mild water and soap solution. |
| • | Use the correct anchor bolts in order to tighten the bolts to the specified torque. Verify that the bolts fully seat. Allow two threads to protrude beyond the point of the nut, the anchor plate, and/or the anchoring device. |
| • | Do not attempt to repair the following parts: |
| - | The retractors |
| - | The buckles |
| - | The webbing |
| • | Replace the complete unit with a new service replacement assembly. |
| • | Do not intermix seat belts from the different model vehicles. |
