Side Marker Lamp Replacement for Isuzu Isuzu MD Steel Tilt (F Model) 1998

Side Marker Lamp Replacement Housing

1. Turn OFF the headlamp switch.

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

2. Disconnect the negative battery cables.



3. Remove the side marker lamp lens hold-down screw.
4. Remove the lens assembly.
5. Remove the socket from the lens assembly.

1. Install the socket into the lens assembly.



2. Install the side marker lamp lens assembly.
3. Install the lens assembly hold-down screw.
4. Connect the negative battery cables.