Name | Location | Locator View | Connector End View |
|---|---|---|---|
Battery, Inside | On the outboard side of the right frame rail | Power and Grounding Component Views in Wiring Systems | -- |
Battery, Outside | On the outboard side of the right frame rail | Power and Grounding Component Views in Wiring Systems | -- |
Fusible Link | In the engine harness to starter solenoid C2 | -- | -- |
Generator | On the right side of the engine | ||
Generator Inline Fuse | Taped to the engine harness, at the rear of the generator | ||
Ground Block (6 cavities) | On the right frame, inboard, part of the negative battery cable | Power and Grounding Component Views in Wiring Systems | -- |
Hourmeter | Under the left side of the IP near the data link connector (DLC) | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges, and Console | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges, and Console |
Ignition Switch | On the right side of the steering column | Lighting Systems Component Views in Lighting Systems | Power and Grounding Connector End Views in Wiring Systems |
Instrument Panel Cluster (IPC) | On the left side of the IP | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges, and Console | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges, and Console |
Instrument Panel Cluster (IPC) C1 (15 cavities) | In the upper IP harness to the IPC | -- | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges, and Console |
Instrument Panel Cluster (IPC) C2 (9 cavities) | In the upper IP harness to the IPC | -- | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges, and Console |
Instrument Panel Cluster (IPC) C3 (17 cavities) | In the upper IP harness to the IPC | -- | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges, and Console |
Instrument Panel Cluster (IPC) C4 (7 cavities) | In the upper IP harness to the IPC | -- | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges, and Console |
Instrument Panel Cluster (IPC) C5 (13 cavities) | In the upper IP harness to the IPC | -- | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges, and Console |
IP Fuse Block | In the right top of the IP, under the access panel | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges, and Console | -- |
Multifunction Alarm Module (MFAM) (Air Brakes) | Under the right seat | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges, and Console | -- |
Multifunction Alarm Module (MFAM) (Air Brakes) C1 (16 cavities) | In the lower IP harness to the MFAM | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges, and Console | Audible Warnings Connector End Views in Instrument Panel, Gauges, and Console |
Multifunction Alarm Module (MFAM) (w/ Automatic Engine Shutdown) C2 (4 cavities) | In the lower IP harness to the MFAM | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges, and Console | Audible Warnings Connector End Views in Instrument Panel, Gauges, and Console |
Multifunction Alarm Module (MFAM) (Hydraulic Brakes) | Under the right seat | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges, and Console | -- |
Multifunction Alarm Module (MFAM) (Hydraulic Brakes) C1 (16 cavities) | In the lower IP harness to the MFAM | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges, and Console | Audible Warnings Connector End Views in Instrument Panel, Gauges, and Console |
Neutral Position Switch (Automatic Transmission) | On the lower left side of the transmission | ||
Negative Battery Cable | From the outboard battery NEG terminal to the outside right frame rail with a feed to the ground block on the inside of the right frame rail | Power and Grounding Component Views in Wiring Systems | -- |
Negative Battery to Battery Cable | From the outboard battery NEG terminal to the inboard battery NEG terminal | Power and Grounding Component Views in Wiring Systems | -- |
Positive Battery Cable | From the positive battery cable POS terminal to the starter solenoid, at the starter motor | Power and Grounding Component Views in Wiring Systems | -- |
Positive Battery Cable (Dual Batteries) | From the outboard battery POS terminal to the starter solenoid | Power and Grounding Component Views in Wiring Systems | -- |
Positive Battery to Battery/Feed Cable | From the outboard battery POS terminal to the inboard battery POS terminal with a feed to the MaxiFuse® block | Power and Grounding Component Views in Wiring Systems | -- |
Starter Motor | On the lower right side of the engine | -- | |
Starter Relay | On the right frame rail at the right engine mount bracket | ||
Starter Solenoid | On the lower right side of the engine, part of the starter motor assembly | -- | |
Starter Motor Ground Cable | On the lower right side of the engine from the starter to the right frame rail | -- | |
C116 (8 cavities) | In the engine harness, to the front chassis harness, at the right front of the engine | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C121 (2 cavities) | In the starter harness, to the BLU and the BLK fusible links, starter solenoid C3 | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C200 (56 cavities) | In the lower IP harness, to the front chassis harness, in the left center of the cab, in the cab interface connector | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C212 (84 cavities) | In the lower IP harness, to the upper IP harness, in the left center of the IP at the floor | -- | Inline Harness Connector End Views in Wiring Systems |
C412 (8 cavities) (Automatic Transmission) | In the front chassis harness, to the transmission harness or connector C412 jumper, behind the engine, at the top of the bell housing | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C419 (1 cavity) (Automatic Transmission) | In the starter harness, to the front chassis harness, on the bell housing mounting bracket | Harness Routing Views in Wiring Systems | -- |
C419 (1 cavity) (Manual Transmission) | In the starter harness, to the front chassis harness, on the bell housing mounting bracket | Harness Routing Views in Wiring Systems | -- |
G107 | From the front chassis harness, on the left frame rail, approximately 25 cm (9.8 in) to the rear of the front shock absorber | -- | -- |
G400 | The negative battery cable to the right frame rail | -- | -- |
P100 | On the front chassis harness, under the hood, in the center of the bulkhead, in the cab interface connector housing | -- | -- |
S103 | In the front chassis harness, approximately 7 cm (2.8 in) to the rear of the main harness breakout | -- | -- |
S107 | In the front chassis harness, approximately 4 cm (1.6 in) to the ABS harness breakout | -- | -- |
S182 | In the front chassis harness, approximately 13 cm (5.1 in) to the rear of the engine oil pressure switch breakout | -- | -- |
S227 | In the upper IP harness, under the IP, approximately 6 cm (2.4 in) to the left of the fuse block breakout | -- | -- |
S254 | In the lower IP harness | -- | -- |
S279 | In the lower IP harness, below the IP, approximately 5 cm (2.0 in) to the right of the relay center 1 harness breakout | -- | -- |
S292 | In the lower IP harness, in the main harness, at the frame harness breakout | -- | -- |
