Bearing Cup Replacement for Isuzu Isuzu MD Steel Tilt (F Model) 1999

1. Remove the rear wheel hub (11). Refer to Rear Hub and Bearing Replacement
2. Inspect bearings and bearing cups. Refer to Bearings Inspection

1. Install the rear wheel bearing cup. Position the rear wheel bearing cup in the rear wheel hub.
2. Using a brass drift and a small hammer, alternately drive against the opposite sides of the rear wheel bearing cup outer edge in order to drive the bearing cup in squarely.
3. Ensure that the rear wheel bearing cup seats firmly against the hub shoulder.
4. Install the rear wheel hub. Refer to Rear Hub and Bearing Replacement