Name | Location | Locator View | Connector End View |
|---|---|---|---|
Instrument Panel Cluster (IPC) | On the left side of the IP | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges, and Console | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges, and Console |
Instrument Panel Cluster (IPC) C1 (15 cavities) | In the upper IP harness to the IPC | -- | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges, and Console |
Instrument Panel Cluster (IPC) C2 (9 cavities) | In the upper IP harness to the IPC | -- | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges, and Console |
Instrument Panel Cluster (IPC) C3 (17 cavities) | In the upper IP harness to the IPC | -- | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges, and Console |
Instrument Panel Cluster (IPC) C4 (7 cavities) | In the upper IP harness to the IPC | -- | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges, and Console |
Instrument Panel Cluster (IPC) C5 (13 cavities) | In the upper IP harness to the IPC | -- | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges, and Console |
IP Fuse Block | On the right top of the IP, under the access panel | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges, and Console | -- |
Speedo Adapter | Under the right seat | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges, and Console | Engine Controls Connector End Views in Engine Controls 7.8L (Isuzu) |
Two-Speed Rear Axle Shift Motor | On the front of the rear axle housing | ||
Two-Speed Rear Axle Shift Relay | Mounted on the crossmember forward of the rear axle | ||
Two-Speed Rear Axle Shift Switch (Dash Mounted) (Automatic Transmission) | In the center of the IP | ||
Two-Speed Rear Axle Shift Switch (Shifter Mounted) (Manual Transmission) | On the transmission shift lever | ||
Vehicle Speed Sensor (VSS) (Automatic Transmission) | In the transmission rear tailshaft housing | Engine Controls Component Views in Engine Controls 7.8L (Isuzu) | Engine Controls Connector End Views in Engine Controls 7.8L (Isuzu) |
Vehicle Speed Sensor (VSS) (Manual Transmission) | In the transmission rear tailshaft housing | Engine Controls Component Views in Engine Controls 7.8L (Isuzu) | Engine Controls Connector End Views in Engine Controls 7.8L (Isuzu) |
C200 (56 cavities) | In the lower IP harness to the front chassis harness, left center of the cab, in the cab interface connector housing | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C202 (56 cavities) | In the lower IP harness to the front chassis harness, left center of the cab, in the cab interface connector housing | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C210 (16 cavities) | In the lower IP to the floor harness | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C212 (84 cavities) | In the lower IP harness, to the upper IP harness, in the left center of the IP at the floor | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C219 (2 cavities) | In the lower IP harness, to the floor harness | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C402 (8 cavities) | In the front chassis harness, to the rear chassis and taillamps harness, inside the RH frame rail, inboard of the batteries | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C404 (3 cavities) | In the front chassis harness, to the rear chassis and taillamps harness, inside the RH frame rail, inboard of the batteries | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C407 (14 cavities) (Automatic Transmission) | In the front chassis harness, to the starter harness, on the bell housing mounting bracket | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C407 (14 cavities) (Manual Transmission) | In the front chassis harness, capped, on the bell housing mounting bracket | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C412 (8 cavities) (Automatic Transmission) | In the front chassis harness, to the transmission harness or connector C412 jumper, behind the engine, at the top of the bell housing | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C703 (3 cavities) | On the RH frame rail forward of the rear axle | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G105 | On the left front of the #1 crossmember | -- | -- |
G406 (Two-Speed Rear Axle and Air Brake Dryer) | In the rear chassis and taillamps harness, inboard the RH frame rail, in the ground block (part of the negative battery cable) | -- | -- |
Splice Pack 3 | Part of the upper IP harness, under the crash pad, in the top of the IP, row 3 | -- | -- |
Splice Pack 5 | Part of the lower IP harness, below the left side of the IP, to the right of the steering column, row 2 | -- | -- |
S108 | In the front chassis harness, approximately 11 cm (4.3 in) to the ABS harness breakout | -- | -- |
S130 | In the front chassis harness, approximately 17 cm (6.7 in) to the starter harness breakout | -- | -- |
S227 | In the upper IP harness, under the IP, approximately 6 cm (2.4 in) to the left of the fuse block breakout | -- | -- |
S235 | In the lower IP harness, in the main harness at the HVAC and turn/hazard flasher module harness breakout | -- | -- |
S240 | In the lower IP harness | -- | -- |
S279 | In the lower IP harness, below the IP, approximately 5 cm (2.0 in) to the right of the relay center 1 harness breakout | -- | -- |
S280 | In the lower IP harness, in the main harness, at the frame harness breakout | -- | -- |
S281 | In the lower IP harness, approximately 5 cm (2.0 in) toward relay center 2, from the IP harness breakout | -- | -- |
S282 | In the lower IP harness, approximately 5 cm (2.0 in) toward relay center 2, from the IP harness breakout | -- | -- |
S292 | In the lower IP harness, in the main harness, at the frame harness breakout | -- | -- |
S325 | In the lower IP harness | -- | -- |
S328 | In the lower IP harness | -- | -- |
S339 | In the lower IP harness | -- | -- |
S357 | In the floor harness | -- | -- |
S358 | In the floor harness | -- | -- |
S703 | In the two-speed axle control harness, approximately 5.0 cm (2.0 in) before the relay breakout | -- | -- |
