GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 1999 🢒 Isuzu MD Steel Tilt (F Model) 🢒 Transmission/Transaxle 🢒 Manual Transmission - Medium Duty 🢒 Transmission Oil Changing

Removal Procedure
  1. Clean the area around the drain and fill plugs.

    2. Object Number: 204756 Size: SH
  2. Remove the oil fill plug (1) and the seal (2) from the transmission case. Discard the seal.
  3. Position a container under the oil drain hole to catch the transmission oil.
  4. Remove the oil drain plug (3) and the seal (4) from the transmission case. Discard the seal.

Installation Procedure

    Object Number: 204756 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the oil drain plug (3) and a new seal (4) into the transmission case.

    2. Tighten
    Tighten the oil drain plug to 69 N·m (51 lb ft).

  2. Fill the transmission to the level of the oil fill plug hole with transmission oil. Refer to Lubrication Specifications .
  3. Install the oil fill plug (1) and a new seal (2) to the transmission case.

    4. Tighten
    Tighten the oil fill plug to 69 N·m (51 lb ft).