GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 1999 🢒 Isuzu MD Steel Tilt (F Model) 🢒 Steering 🢒 Steering Linkage (Non-Rack & Pinion) 🢒 Steering Linkage Tie Rod End Inspection
   • 
  • Inspect the tie rod end (7) threads for the following conditions:

    • Object Number: 374077 Size: SH
       - Damage
       - Corrosion
       • 
  • Inspect the ball stud (7) threads for the following conditions:
    •    - Damage
       - Corrosion
       • 
  • Inspect the ball stud nut (1) threads for the following conditions:
    •    - Damage
       - Corrosion
       • 
  • Inspect the ball stud (7) taper for the following conditions:
    •    - Nicks
       - Dirt
       • 
  • Inspect the tie rod end grease hole threads if equipped.
    •    • 
  • Replace the grease zerk fitting if equipped.
    •    • 
  • Clean all of the threads and tapers of the following compounds:
    •    - Dirt
       - Rust
       • 
  • Inspect the clamp (6), bolt (3) and nut (5) for the following:
    •    - Dirt
       - Rust
       - Stripped threads
       • 
  • If there is excessive wear, damaged threads, damage to the tie rod ball joint, or excessive corrosion replace the tie rod ball joint and the attaching parts.