Clearance Lamp Replacement Lamp Housing

1. Turn OFF the headlamp switch.

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

2. Disconnect the negative battery cables.



3. Remove the clearance lamp lens hold-down screws.
4. Remove the clearance lamp lens.
5. Remove the four screws from the lamp housing.
6. Disconnect the clearance lamp electrical connector.
7. Remove the lamp housing.

1. Connect the clearance lamp electrical connector.
2. Install the four screws in order to install the lamp housing.
3. Install the clearance lamp lens.
4. Install the lens hold-down screws.
5. Connect the negative battery cables.