For 1990-2009 cars only
- Depending on where the leak is located, remove either the trim molding or the headliner in order to repair the leak.
- Determine the source of water entry.
- If water is leaking at the top edge of the windshield, reseal the windshield using the 3M Window-Weld Resealant P/N 08633 and the applicator gun 3M 06992, or the equivalent.
- If water is leaking into the vehicle at the sides of the glass, use the 3M Super Fast urethane auto glass sealant P/N 08609, or the equivalent.
Use a "duck bill" applicator tip in order to inject the sealant under the molded glass seal.
