GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 1999 🢒 Isuzu MD Steel Tilt (F Model) 🢒 Body and Accessories 🢒 Doors 🢒 Door Lock Replacement

Removal Procedure
  1. Remove the trim panel. Refer to Door Trim Panel Replacement .
  2. Remove the water deflector.
  3. Remove the door window. Refer to Door Window Replacement .
  4. Remove the window regulator and the motor. Refer to Door Window Regulator Replacement .

    5. Object Number: 214714 Size: SH
  5. Remove the lock rods from the lock.

    6. Object Number: 214717 Size: SH
  6. Remove the screw from the lock from the left door.
  7. Remove the lock from the door.

    8. Object Number: 214716 Size: SH
  8. Remove the screw from the lock from the right door.
  9. Remove the lock from the door.

Installation Procedure

    Object Number: 214717 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the lock to the left door with the screw.

    2. Tighten
    Tighten the screw to 4 N·m (35 lb in).


    Object Number: 214716 Size: SH
  2. Install the lock to the right door with the screw.

    3. Tighten
    Tighten the screw to 4 N·m (35 lb in).


    Object Number: 214714 Size: SH
  3. Install the lock rods to the lock.
  4. Install the window regulator. Refer to Door Window Regulator Replacement .
  5. Install the door window. Refer to Door Window Replacement .
  6. Install the water deflector.
  7. Install the trim panel. Refer to Door Trim Panel Replacement .