Seat Riser Replacement Driver Seat

1. Remove the seat nuts.
2. Remove the driver seat.



3. Remove the riser cover bolts (4).
4. Remove the riser cover (3).
5. Lift the floor covering upward.
6. Remove the riser nuts.
7. Lift the floor covering upward.
8. Remove the riser bolts.
9. Remove the riser (2).

1. Install the riser.
2. Install the riser bolts.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the riser nuts.

Tighten
Tighten the nuts to 31 N·m (23 lb ft).




4. Install the riser cover (3).
5. Install the riser cover bolts (4).

Tighten
Tighten the bolts to 8 N·m (71 lb in).

6. Install the driver seat (1).
7. Install the seat nuts.

Tighten
Tighten the nuts to 15 N·m (12 lb ft).

Seat Riser Replacement Passenger Seat

1. Remove the seat nuts.
2. Remove the passenger seat.



3. Remove the speedo adapter screws.



4. Remove the riser cover bolts.
5. Remove the riser cover.



6. Remove the brake control module bracket bolts.
7. Remove the brake control module bracket.



8. Remove the mount bracket assembly bolts.
9. Carefully slide the mount bracket assembly forward.
10. Lift the floor covering upward.
11. Remove the riser nuts.
12. Lift the floor covering upward.
13. Remove the riser bolts.



14. Remove the riser.

1. Install the riser.
2. Install the riser bolts.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the riser nuts.

Tighten
Tighten the nuts to 31 N·m (23 lb ft).




4. Carefully slide the mount bracket assembly rearward.
5. Install the mount bracket assembly bolts.

Tighten
Tighten the bolts to 3 N·m (27 lb in).




6. Install the brake control module bracket in the vehicle.
7. Install the brake control module bracket bolts.

Tighten
Tighten the bolts to 3 N·m (27 lb in).




8. Install the riser cover.



9. Install the speedo adapter screws.

Tighten
Tighten the screws to 3 N·m (27 lb in).

10. Install the riser cover bolts.

Tighten
Tighten the bolts to 8 N·m (71 lb in).




11. Install the seat.
12. Install the seat nuts.

Tighten
Tighten the nuts to 15 N·m (12 lb ft).