Side Door Upper Garnish Molding Replacement On Roof Panel

1. Remove the rear upper trim panels.
2. Remove the assist handle, if equipped.
3. Pull the side molding outward in order to release the retaining clips.

1. Push the side molding into position.
2. Install the assist handle, if equipped.
3. Install the rear trim panel.

Side Door Upper Garnish Molding Replacement On Body

1. Remove the curtain rails.
2. Pull down on the door opening sealing strip.



3. In order to release the adhesive, remove the side molding by carefully pulling the side molding away.

1. Apply adhesive to the side molding, as necessary.
2. Push the molding into position against the body of the vehicle.
3. Install the door opening sealing strip.
4. Install the curtain rails.