Power Steering Gear Resuction Valve Replacement for Isuzu Isuzu MD Steel Tilt (F Model) 2000

1. Position the front wheels and the steering wheel straight ahead.
2. Tilt the cab. Refer to Cab Tilting in General Information.
3. Place a container under the power steering gear in order to catch the fluid.



4. Remove the following components from the steering gear:

4.1.	The resuction valve plug (10)

4.2.	The O-ring (12)

4.3.	The resuction valve (9)

1. Install the following components into the steering gear:

1.1.	The resuction valve (9)

1.2.	The O-ring (12)

1.3.	The resuction valve plug (10)

2. Fill and bleed the power steering system. Refer to Power Steering System Bleeding .
3. Lower the cab.