GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2001 🢒 Isuzu T-Series (Truck Line C) 🢒 Engine 🢒 Engine Electrical 🢒 Engine Ground Strap Replacement

Removal Procedure
  1. Tilt the cab. Refer to Cab Tilting in General Information.

    2. Object Number: 227237 Size: SH
  2. Disconnect the ground strap from the generator.

    3. Object Number: 227251 Size: SH
  3. Disconnect the ground strap from the front engine harness.
  4. Remove the ground strap from the left side frame rail.
  5. Remove the ground strap from the front engine harness.

Installation Procedure

    Object Number: 227251 Size: SH
  1. Install the ground strap.

    2. Route the ground strap to the original routing in the front engine harness.

  2. Connect the ground strap to the left side frame rail.

    3. Object Number: 227237 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Connect the ground strap to the generator.

    4. Use additional ground straps in order to connect the body and the frame to the engine and the transmission. Connect all of the ground straps in order to ensure a proper ground path to the battery from all of the electrical components.

    Tighten

        • Tighten the ground strap bolt to generator to 11 N·m (97 lb in).
        • Tighten the ground strap bolt to frame rail to 30 N·m (22 lb ft).
  4. Lower the cab.