Step | Action | Value | Yes | No |
|---|---|---|---|---|
1 |
Did you complete the action? | -- | Go to Step 2 | -- |
2 | Inspect the Multi Function Control Module system, if equipped. Does the system operate properly? | -- | Go to Step 3 | Go to Step 17 |
3 | Does the battery voltage measure above the specified value? | 8 V | System OK | Go to Step 4 |
4 | Inspect the charging circuit and/or generator condition. Does the system operate properly? | -- | Go to Step 5 | Go to Step 17 |
5 | Inspect the engine control module (ECM) power sources. Are any fuses open? | -- | Go to Step 18 | Go to Step 6 |
6 | Does the main relay operate normally? | -- | Go to Step 7 | Go to Step 19 |
7 | Does the PCV relay operate normally? | -- | Go to Step 8 | Go to Step 20 |
8 | Are the wiring harness for the main and the PCV relay restricted? | -- | Go to Step 21 | Go to Step 9 |
9 | Is the fuel used within specification? | 30-44 API Gravity | Go to Step 10 | Go to Step 22 |
10 | Is the fuel contaminated with gasoline? | -- | Go to Step 22 | Go to Step 11 |
11 | Did you find any leakage of the fuel pump, the injection pipe, etc.? | -- | Go to Step 17 | Go to Step 12 |
12 | Did you bleed air from the fuel line? | -- | Go to Step 13 | Go to Step 23 |
13 | Did you find a clog, choke, or breakage of the air filter? | -- | Go to Step 17 | Go to Step 14 |
14 | Is the fuel pre-filter restricted? | -- | Go to Step 15 | Go to Step 17 |
15 | The gauze filter is fixed in the suction eye bolt on the supply pump. Is the gauze filter restricted? | -- | Go to Step 24 | Go to Step 16 |
16 | Inspect the fuel filter for a clog, breakage, etc. Is the main fuel filter good? | -- | System OK | Go to Step 25 |
17 | Replace the problem portion. Did you complete the replacement? | -- | Go to Step 26 | -- |
18 | Replace the fuse. Did you complete the replacement? | -- | Go to Step 26 | -- |
19 | Replace the main relay. Did you complete the replacement? | -- | Go to Step 26 | -- |
20 | Replace the PCV relay. Did you complete the replacement? | -- | Go to Step 26 | -- |
21 | Replace the problem wiring harness. Did you complete the replacement? | -- | Go to Step 26 | -- |
22 | Replace the fuel with the recommended specification. Did you complete the replacement? | -- | Go to Step 26 | -- |
23 | Bleed the air from the fuel line. Did you complete the action? | -- | Go to Step 26 | -- |
24 | Replace the gage filter. Did you complete the replacement? | -- | Go to Step 26 | -- |
25 | Replace the fuel filter element. Did you complete the replacement? | -- | Go to Step 26 | -- |
26 | Operate the vehicle. Does the engine operate normally? | -- | System OK | Go to Step 1 |
